Cantilever racking system for long and heavy loads in a warehouse
Long-Load Storage Expertise

High-capacity storage for timber, pipes, profiles and panels

My Favorite Shelf Industrial Co., Ltd. designs and manufactures cantilever racking for buyers who need to store long, heavy or irregular loads without obstruction from front columns. The open-front layout allows forklifts, cranes or sideloaders to approach the rack directly, making it practical for lumber yards, steel service centers, pipe stockyards and building-material warehouses.

Each project begins with your load list, building dimensions, handling equipment, floor condition and local structural requirements. Our engineers then confirm upright size, arm spacing, base connection, anchor strategy and surface finish before production. For sites in seismic zones or coastal climates, the design can include calculation packages and corrosion-protection recommendations for review by your local engineer.

  • Single-sided and double-sided configurations
  • Adjustable arms for changing product mixes
  • Project-specific load calculations
  • Export packing and customs documentation
  • Powder-coated or galvanized finish options
  • Installation manuals and remote support
Configurations

Cantilever Systems Built to Your Load

From one-sided wall racking to heavy-duty double-sided storage, every layout is planned around product length, arm projection, access aisle and handling method.

Single-Sided Cantilever Racking

Space-efficient racking for wall-side or column-line storage where access is required from one side only.

  • Clear loading face for forklifts or cranes
  • Suitable for pipe yards and building-material stores
  • Layout optimized for building columns and aisles

Double-Sided Cantilever Racking

Central-aisle storage that uses both sides of the upright frame to increase capacity in the same floor area.

  • Higher storage density for long goods
  • Ideal for organized yards and distribution hubs
  • Access from both sides for faster order picking

Heavy-Duty Cantilever Racking

Reinforced uprights, arms and bases for dense steel, concrete products and other demanding long loads.

  • Project-specific upright and arm sizing
  • Heavy base plates and anchor planning
  • Designed for forklift, crane or gantry handling

Adjustable-Arm Cantilever Racking

Arms can be repositioned to suit new product sizes, helping the rack adapt as your inventory changes.

  • Flexible vertical spacing
  • Useful for mixed-profile stockrooms
  • Easy expansion with additional arms or bays

Guide Rails and Storage Accessories

Guide rails, load separators, protective guards and other accessories help organize long goods and protect the rack.

  • Separators for pipes and profiles
  • End stops and protective barriers
  • Accessories matched to handling equipment

Custom-Engineered Long-Load Racking

For unusual load shapes, tall clear heights or special handling equipment, we develop a layout around your actual operation.

  • Custom arm lengths and spacing
  • Seismic or coastal-site review available
  • Documentation for procurement and approval
Engineering Data

Configuration Details Buyers Can Verify

Cantilever racking performance depends on the complete system, not one component. This is why we review the upright, arm, base, anchorage and handling aisle together.

Design Item What We Engineer Buyer Benefit
Upright Frames Roll-formed or structural steel columns selected for height, arm loading and local code requirements. Stable support with documented sizing for approval teams.
Arms and Spacing Arm length, vertical pitch and locking method matched to product dimensions and handling method. Efficient storage, easier loading and room for future product changes.
Base and Anchorage Base plates, anchor specifications and floor interface reviewed for static and seismic conditions where required. Safer installation and clearer coordination with local engineers.
Surface Protection Powder coating, enhanced pretreatment or hot-dip galvanizing for humid, coastal and cold-storage applications. Finish selected for the actual operating environment.
Load Documentation Load plans and calculation packages prepared for the supplied product data and site conditions. Procurement and safety teams can review design assumptions before shipment.
Export Packing Container-optimized bundles, steel strapping, packing lists and loading photos. Better freight planning and fewer receiving surprises at the destination port.

To review a cantilever layout, please prepare building dimensions, column grid, product drawings, maximum unit weight, required arm projection, handling equipment and destination country. Project documents can be directed to [email protected].

Applications

Where Cantilever Racking Works Best

Cantilever systems are chosen when open access, long-load support and organized stock handling matter more than standard pallet rows.

Timber and Building Materials

Storage for lumber, planks, boards, doors, window frames, pre-finished panels and other long building products.

Steel and Metal Service Centers

Organized storage for beams, channels, angle iron, bars, sheet packs and cut-to-length steel profiles.

Pipe, Tube and Extrusion Yards

Lane-based layouts with arms and separators for pipes, tubes, plastic profiles and aluminum extrusions.

Panel, Board and Furniture Plants

Horizontal support for flat or bundled products where surface protection and safe forklift access are required.

Automotive and Spare Parts

Long parts such as axles, bumper bars, exhaust sections, chassis components and service-center stock.

Distribution and Warehousing

Storage around existing pallet racking, mezzanine floors and loading areas for buyers with mixed inventory.

Built for Audit

Verified Design, Production and Export Control

My Favorite Shelf Industrial Co., Ltd. manages racking projects under ISO 9001, ISO 14001 and ISO 45001 certified systems, with CE documentation available for applicable product configurations. For overseas buyers, our documentation and inspection process is designed to support internal procurement review, customs clearance and installation planning.

Engineering Review

Layout, load assumptions, arm configuration, anchor details and finish requirements are checked before production.

Material Traceability

Material certificates, dimensional checks and coating records can be supplied on request for project files.

Pre-Shipment Inspection

Component counts, packing condition, bundle identification and container loading photos are documented before dispatch.

Export Documentation

Commercial invoice, packing list, bill of lading, certificate of origin and installation manuals can be prepared for the shipment.

Project Workflow

From Load Data to Delivery

A clear process helps overseas buyers compare layouts, approve drawings and plan installation without unnecessary delays.

01

Requirement Review

Share your building dimensions, product list, unit weights, handling equipment, destination port and local design requirements.

02

Layout and Proposal

Our team prepares a storage concept, arm arrangement, estimated capacity and quotation for discussion.

03

Engineering Approval

Detailed drawings, loading assumptions and finish specifications are finalized before production begins.

04

Production and Inspection

Profiles, arms, bases and coatings are produced and checked against the approved project documents.

05

Packing and Shipping

Bundles are prepared for container loading, with packing lists and shipping documents matched to the order.

06

Installation Support

Installation manuals, remote guidance and supervising engineer arrangements are available for overseas projects.

Buyer Questions

Cantilever Racking FAQ

Cantilever racking is used for long, bulky or irregular loads such as timber, steel beams, pipes, tubes, profiles, panels, boards, furniture packs and similar products. Arms support the load from below and leave the front clear for forklift or crane handling.

Choose single-sided racking when the rack stands against a wall, column line or aisle boundary and access is required from one side. Choose double-sided racking when the rack can be used from both sides to increase storage density, especially in central aisle layouts.

Yes. Most cantilever systems use adjustable arms so the vertical spacing can be changed as your product mix evolves. Arm spacing, pin arrangement and locking method are confirmed during engineering.

Capacity depends on upright sections, base design, arm section, arm length, arm spacing, load position, floor anchorage and local structural requirements. We provide project-specific calculations rather than relying on a single generic load figure.

Yes. For seismic regions and coastal or humid locations we review base plates, anchors, bracing, connection details and surface protection. We can prepare calculation packages for review by your local engineer and recommend powder coating or galvanized finishes where appropriate.

Please provide building length, width and clear height; column positions; product length, width, height and weight; arm spacing requirements; forklift or crane details; floor information; destination port or country; and any local design codes or seismic requirements.

Yes. Typical export documents include commercial invoice, packing list, bill of lading, certificate of origin and, when requested, material certificates, test reports and installation manuals. Supervising engineers can be dispatched for installation and commissioning, and remote support is available after handover.

For humid, coastal or outdoor conditions we recommend enhanced pretreatment with epoxy-polyester powder coating, or hot-dip galvanized components for high-corrosion environments. The final specification should consider the local climate, cleaning regime and expected service life.

Start Your Project

Request a Cantilever Racking Layout and Quotation

Share your building dimensions, long-load details, handling equipment and destination country. Our engineering team will review the project and propose a practical cantilever racking layout, arm arrangement and export packing plan.

Project files and questions: [email protected]

Download Catalog